Robot Art

About a week or so ago, Professor Amy Banzaert - director of the Wellesley Engineering Laboratory - sent out an invite to enter an international competition and several students (we) answered the call. We're building a robot to make art!

The 2016 1st Annual International RobotArt Competition aims to foster innovation in artificial intelligence, processing and robotics. Considering that Wellesley is not an engineering school (and doesn't have an engineering department), we definitely have our work cut out for us and must be resourceful in our project.

We had our first meeting on the Sunday before March and covered quite a bit for an intro into the area:
  • What is robotics? 
  • Have robots been built for painting, decorating, etc?
  • What are our backgrounds? 
  • How can we divide the project into parts?
  • What to do for next time?
With all of those questions in mind, we are absolutely seeking to grab more teammates and seek out help in areas we haven't touched before. Overall, we're excited for this. Check out the team blog we're developing: wellesleyrobotart.blogspot.com. (Unfortunately, this project was not completed /: )

Comments

Post a Comment

Popular posts from this blog

Hackathon: TechTogether Boston

Image
iOS app Last weekend, I had the wonderful opportunity to participate in Boston's largest all-female and non-binary hackathon! A group of friends and I wanted to digest as much tech and nerd information as possible, and we basically made it our mission to go to nearly every workshop session offered for two days straight. I don't know how we managed this but we did. From 5p on Friday and all day on Saturday, it seemed I bounced from one room to the next with a nap here and there. There was a workshop on rapid prototyping with AdobeXD -- which I am in love with. Then, I was able to create my first phone application during a workshop on iOS app development with Swift  (it's much easier than I had imagined), followed by a workshop at 2am on Android app developmen t. For my very first hackathon-conference, I wanted to focus on skill development and learning, rather than the competition. However, seeing everyone so wrapped up in their individual designs and programming ...
Read more

Women of Color in Graduate School

Image
Recently, I've been asked (by a few people) how it feels to go through graduate school as a woman of color. And, to be completely honest, it's incredibly exciting and exhausting all at the same time. Being a woman of color -- specifically a black woman, particularly in STEM -- has a lot of challenges. If you simply search the phrase "black in graduate school," you will get statistics that are very humbling; articles and think-pieces on how different the Black or person-of-color experience is from students who are not minorities; and other outlets detailing how little support many Black and non-Black students of color feel that they have. In fact, the Council on Graduate Schools recently reported that, in 2017, Black students made up just 11.9% of all first-time graduate students in the United States. (That said, 68% of them were women! So, we are making p r o g r e s s.) I'm not sure what the numbers are at Boston University, but it doesn't seem that far o...
Read more

Truss Design (Final)

Image
We finally made it to the end! After the preliminary design report, it was time to finalize our actual design (since we were given enough materials to make one truss to test). After doing a few more draft sketches and analysis, I was able to pick up on patterns on which types of designs produced the maximum strength (all within the parameters we were given). Finally, I came up with the sketch at the bottom-right, and the MATLAB analysis produced the highest load we were able to reach. We theorized that: two members would buckle first instead of just one (Members 3 and 4); the maximum load is 11.62 ± 0.063N; and the total cost of the truss is $290 (under the budget limit). From there, we moved to prototyping: we cut the straws as close as possible to the lengths specified in our final design. To create uniform gusset plates, our "joints," we used the circular cap of an individual Tropicana Orange Juice bottle. It met the area requirements and acted as a stamp...
Read more